The following options and accessories are available for the KAMA ProCut 74 and KAMA ProCut 105 Automatic Die Cutters. Other auxiliaries and customised accessories on request.

KAMA 74 F and KAMA 105 F Hot Foil Stamping Module

The solution for our customers to meet the trend towards high-quality finish. The KAMA Hot Foil Stamping Module has a six-zone heating plate and two individually programmable foil feeders. Click here for more information.

KAMA 74 P Hot Cut Module (for ProCut 74) and KAMA 105 P (for ProCut 105) Automatic Die Cutter

Important advance in quality in processing plastics: the KAMA Hot Cut Module for the ProCut 74 and ProCut 105 Automatic Die Cutter uses heated cutting and creasing blades. Both production quality and efficiency improve greatly. Click here for more information.

Special chases with clamping bars and perforated plate for small dies

	KAMA special chases allow small dies and dies previously used with other cutters such as cylinders, hand-fed or flat-bed cutters to be used. Such dies are either fixed with the help of clamping bars or screwed to the perforated plate.
	Several small dies can so be arranged in one chase. The clamping bars will be ideally suited if the individual dies have the same size. If not, the dies should be screwed to the perforated plate.
	The chase with perforated plate makes it possible to insert several universal creasing blades at any position. It will thus not be necessary to make complete dies for simple creasing and perforating jobs. Click here for more information.

Platen changing system (4+1 mm)

This system aims to reduce the set-up time and costs for repeat job with many creasing lines. Standard, medium and hard platens can be used. The platen changing system comprises a chase fine adjustment unit, a 4 mm base plate with fixation system for AS platens and soft, a medium and a hard platens as desired.

Frontlay control

The front edges of the sheets are monitored by adjustable reflection light barriers. The machine will be stopped if a sheet is misaligned (e.g. by 0.2 mm, other settings are possible). This prevents misaligned sheets from entering the cutting station where they could cause major blockages. The frontlay control can be activated and deactivated as desired.

Electrostatic discharge system

This systems aims to equalise different potentials when working with electro-statically charged materials. It will be particularly helpful if you process laminated cardboard or plastic materials, as this minimises adherence of the sheets to each other, thus avoiding double sheet errors, and to the feeding table and platen. The discharge system will be installed on request and can be activated and deactivated as desired.