| |
| |
|
| |
KAMA HOT FOIL STAMPING MODULE 74 F
Stamps fine effects
Once you have mounted
the Hot Foil Stamping Module, the ProCut 74 cutter
is ready for both cutting or hot foil finishing operations. Changing
between these two functions is simple and provides you with extra
flexibility: it only takes about 10 minutes to exchange the chase
for the heating plate. After a heating time of only 5–10 minutes
you can start hot foil stamping.
 |
|
KAMA
ProCut 74 cutters can be retrofitted with the Hot Foil Stamping
Module
|
Features and accessories
| Quick set-up  |
The standard chase is replaced for the insulated heating
plate with die in next to no time
NEW Option: Quick change system for hot foil stamping |
Efficient processing |
Hot foil stamping and embossing in one stage |
Material-saving |
Two foil feeders with individually programmable servo-drives,
variably programmable feed lengths
|
Energy-saving |
Six independently controllable heating zones |
Programmable |
Omron PLC in a separate switch cabinet |
User-friendly |
Light-weight carbon fibre frame accommodates the heating
plate |
Technical data
| Maximum stamping area: |
720 x 580 mm (28
x 23 in) |
Max. temperature: |
180 °C (300 °F) |
Cardboard/ paper weight*: |
100 to 1,000 gsm |
Max. machine performance*: |
4,500 sheets/h |
Film core diameter: |
25 mm (1 in) |
Film reel diameter: |
up to 150 mm (4.5 in) |
* dependent on material, size and
printing block arrangement
|
|
